Aller au contenu principal

Magnétostatique

La magnétostatique (en anglais magnetostatics) correspond au calcul de la distribution du champ ou de l’induction magnétiques produit par des courants continus ou des aimants.

Considérons le domaine Ω\Omega de R3\mathbb{R}^3 constitué de plusieurs sous-domaines schématisé par la figure : Domaine magnétostatique Domaine magnétostatique

  • Ωm\Omega_m correspondant à des matériaux magnétiques ;
  • Ωc\Omega_c correspondant à des conducteurs électriques parcourus par une densité de courant imposée par une source extérieure js{\bf j_s} ;
  • Ωa\Omega_a correspondant à des aimants permanents d’induction rémanente br{\bf b_r} ;
  • une zone d’air entourant ses différents sous-domaines.

Et sa frontière Γ(=∂Ω)\Gamma (=\partial\Omega) est divisée en deux morceaux Γd\Gamma_d et Γn\Gamma_n.

Les relations régissant la magnétostatique sont :

  • Les équations de Maxwell en statique suivantes : {div b=0rot h=js dans Ωc, et 0 ailleurs\left\{\begin{aligned}\text{div}\,{\bf b} &= 0 \\ {\bf rot}\,{\bf h} &= {\bf j_s}~\text{dans } \Omega_c, \text{ et } {\bf 0} \text{ ailleurs}\end{aligned}\right.
  • Les lois de comportements magnétiques : {b=μ0 hdans l’air et Ωcb=μ hdans Ωmb=μ0μra h+brdans Ωa\left\{\begin{aligned}{\bf b} &= \mu_0\,{\bf h}&\text{dans l'air et }\Omega_c \\ {\bf b} &= \mu\,{\bf h} &\text{dans~}\Omega_m \\ {\bf b} &= \mu_0\mu_{ra}\, {\bf h}+{\bf b_r} &\text{dans~}\Omega_a\end{aligned}\right.
  • Les contions aux limites, par exemple :
    • continuité de la composante normale de l’induction : n⋅b=0{\bf n}\cdot{\bf b} = 0 sur Γd\Gamma_d ;
    • continuité de la composante tangentielle du champ : n∧h=0{\bf n}\wedge{\bf h} = {\bf 0} sur Γn\Gamma_n.

Formulation en potentiel vecteur magnétique

Formulation forte

b{\bf b} étant à divergence nulle, nous avons vu dans le premier chapitre, qu’il était possible de définir un potentiel vecteur magnétique a{\bf a} tel que :

b=rot a{\bf b} = {\bf rot}\,{\bf a}

En lui associant les lois de comportement et en reportant dans l’équation de Maxwell-Ampère, on obtient :

{rot(1μ0rot a)−js=0 , dans Ωcrot(1μraμ0(rot a−br))=0 , dans Ωarot(1μrot a)=0 , ailleurs \left\{\begin{aligned} {\bf rot}\left(\frac{1}{\mu_0}{\bf rot}\,{\bf a}\right) - {\bf j_s} &= 0 ~ ,\text{ dans }\Omega_c\\ {\bf rot}\left(\frac{1}{\mu_{ra}\mu_0}\left({\bf rot}\,{\bf a}-{\bf b_r}\right)\right) &= 0~ ,\text{ dans }\Omega_a\\ {\bf rot}\left(\frac{1}{\mu}{\bf rot}\,{\bf a}\right) &= 0 ~ ,\text{ ailleurs }\end{aligned}\right.

Et nos conditions aux limites peuvent se traduire par :

{a∧n∣Γd=0rot a∧n∣Γn=0\left\{\begin{aligned} \left.{\bf a}\wedge{\bf n}\right|_{\Gamma_d} &= {\bf 0}\\ \left.{\bf rot}\,{\bf a}\wedge{\bf n}\right|_{\Gamma_n} &= {\bf 0} \end{aligned}\right.

Formulation faible

En appliquant le principe détaillé dans le deuxième chapitre sur la formulation en rot-rot, on peut déduire la formulation faible de notre problème :

Trouver a∈H0(rot,Ω)={a∈H(rot,Ω):a∧n∣Γd=0}{\bf a} \in \textbf{H}_{0}({\bf rot},\Omega) = \{ {\bf a} \in \textbf{H}({\bf rot},\Omega) : {\bf a}\wedge{\bf n}|_{\Gamma_{d}} = 0\}, tel que :

∀a′∈H0(rot,Ω),  (μ−1 rot a , rot a′)Ω+(μ−1 br , rot a′)Ωa+(−js , a′)Ωc=0\forall {\bf a'} \in \textbf{H}_{0}({\bf rot},\Omega),~~ \left(\mu^{-1}\,{\bf rot}\,{\bf a}\,,\,{\bf rot}\,{\bf a'}\right)_{\Omega} + \left(\mu^{-1}\,{\bf b_r}\,,\,{\bf rot}\,{\bf a'}\right)_{\Omega_a} + \left( -{\bf j_s} \,,\, {\bf a'}\right)_{\Omega_c}= 0
Important !

Rappelons ici que la formulation ci-dessus ne conduit pas à une solution unique comme vu dans les chapitres précédents, il nous faudra rajouter une condition de jauge sur a{\bf a} pour pouvoir le calculer en 3D (jauge de Coulomb ou jauge d’arbre).


Formulation en potentiel scalaire magnétique

Formulation forte

Dans le cas particulier d’un problème sans densité de courant source (js=0)({\bf j_s} = {\bf 0}), on a : rot h=0{\bf rot}\,{\bf h} = {\bf 0} dans tout le domaine.

On peut alors définir un potentiel scalaire magnétique ϕ\phi tel que :

h=−grad ϕ{\bf h} = -{\bf grad}\,\phi

En lui associant les lois de comportement et en reportant dans l’équation de Maxwell-Thomson, on obtient :

{div(−μ grad ϕ)=0 ,dans Ω∖Ωadiv(−μ grad ϕ+br)=0 ,dans Ωa\left\{\begin{aligned}\text{div}\left(-\mu\,{\bf grad}\,\phi\right) &= 0~, &\text{dans}~ \Omega\setminus\Omega_a\\ \text{div}\left(-\mu\,{\bf grad}\,\phi + {\bf b_r}\right) &= 0~, &\text{dans}~ \Omega_a \end{aligned}\right.

Et nos conditions aux limites peuvent se traduire par :

{ϕ∣Γn=0grad ϕ⋅n∣Γd=0\left\{\begin{aligned} \left.\phi\right|_{\Gamma_n} &= {\bf 0} \\ \left.{\bf grad}\,\phi\cdot{\bf n}\right|_{\Gamma_d} &= {\bf 0} \end{aligned}\right.

Formulation faible

En procédant de la même façon qu’en électrostatique ou électrocinétique, on déduit la formulation faible associée :

Trouver ϕ∈H0(grad,Ω)={ϕ∈H(grad,Ω):ϕ∣Γn=0}\phi \in \text{H}_{0}({\bf grad},\Omega) = \{ \phi \in \text{H}({\bf grad},\Omega) : \phi|_{\Gamma_{n}} = 0\}, tel que :

∀ϕ′∈H0(grad,Ω),  (−μ grad ϕ , grad ϕ′)Ω+(br , grad ϕ′)Ωa=0\forall \phi' \in \text{H}_{0}({\bf grad},\Omega),~~ \left(-\mu\,{\bf grad}\,\phi\,,\,{\bf grad}\,\phi'\right)_{\Omega} + \left({\bf b_r}\,,\,{\bf grad}\,\phi'\right)_{\Omega_a}= 0